The product is the price of one, and you need to buy 2 or more to deliver the goods, and the purchase of a single product will not be shipped!（It takes more than two to remove static electricity from the car. It is recommended to buy 4 and install 4 doors for one car.）There is no free shipping in remote areas. Shipping costs are subject to the photograph.
Red light is on, static elimination
Solar anti-static warning light
Automobile multifunctional warning light is a new type of solar energy product that integrates the functions of automobile static elimination, driving warning and car door anti-scratch. This product is free of wiring and maintenance. It has a discharge module and a solar energy storage device inside, and is easy to install Convenient, as follows:
Car static elimination function
Elementary physics pointed out that static electricity is mainly generated by friction. For example, when we comb our hair with a plastic comb, the hair will become more and more open, and when we take off our sweater at night, we will see electric sparks. These are all static electricity phenomena in our lives. Driving cars and moving human bodies cannot avoid friction, and static electricity will also be generated. Especially in the dry autumn and winter seasons, the charge cannot be released in time and effectively. When we open the door or touch the dashboard, it is easy to be hit by the static electricity accumulated in the car. Studies by medical experts have confirmed that electrostatic interference can change the normal potential difference of the human body surface and affect normal physiological functions. In severe cases, a variety of pathological symptoms may occur.
This product has a built-in discharge module. One end of the module is in contact with the body through a pure copper spring, and the other end is connected to the conductive product shell. When the body charge is accumulated to a certain extent, there will be a higher potential difference between the body and the product shell. The static electricity of the vehicle body will break down the discharge devices in the module and release the static electricity into the air through the product shell. Before opening the door, we can also touch the surface coating of the product with our hands to discharge the static electricity of the human body and avoid the contact static electricity brought by the human body from touching people.
Driving warning function
The product has built-in high-sensitivity vibration sensors and light sensing devices. At night, criminals lightly touch the car body, and the light warning function is automatically turned on, which can attract the attention of passers-by and play a role in intimidating criminals. The 7 groups of RGB lamp beads can be adjusted to 7 kinds of light colors, 22 kinds of light modes, and the product can be pasted on the rearview mirror, door or front and rear bumpers of the car, which can warn other vehicles when driving to prevent rear-end collisions and other accidents.
Product installation:
The multi-function lamp is equipped with double-sided adhesive stickers, just tear off the protective layer of the adhesive stickers and stick the product to the position where you want to install it.
Product use:
This product has a built-in magnetic sensor, light sensor and vibration sensor. The light can be turned on by sliding the magnetic ring across the surface of the product. After the light is turned on, each slide will change a light color or mode. There are 7 light colors and 22 modes that can be adjusted. . The magnetic ring is placed above the second light and the third light to turn off the light. After the light is turned on, the light sensor and vibration sensor start to work. If the light is in a strong light environment, the light will not be bright, and the body will not be bright without vibration when the light is weak. Only at night, when entering an underground garage or tunnel, the light function will automatically turn on. It will automatically shut down 100 seconds after parking.
LED lights
| Number of lamp beads | Adjustable light color（7 colors adjustable） | Light mode（22 adjustable） |
| RGB three-color LED 7 pcs | blue red green Warm white yellow purple Green, a total of 7 light colors can be adjusted | 1 Blue light strobe -2 Blue light breathing-3 Blue light constant bright-4 Green light strobe-5 Green light breath-6 Green light constant bright-7 Red light strobe-8 Red light breath-9 Red light constant bright-10 Cyan Strobe-11 Cyan Breath-12 Cyan Constant Bright-13 Purple Strobe-14 Purple Breath-15 Purple Constant Bright-16 Yellow Strobe-17 Yellow Breath-18 Yellow Constant Bright-19 White Strobe-20 White Breath-21 White constant bright -22 colorful automatic slow change |
Charge and discharge
| Discharge | Charging time（Standard light intensity） | Discharge（Continuous use time at full power） |
| time | 10-20 hours | 35-40 hours |
Note: The above are theoretical values, there will be a little deviation in actual application
Features:
1, Solar charging, lithium battery storage, no wiring, no maintenance, high efficiency and environmental protection;
2, The product shell is made of high-temperature resistant plastic injection molding, which will not be deformed by the sun. The whole product is fixed without a screw, will not be oxidized and rusted, and the thickness is only 7.5mm, which is beautiful and generous.
3. The intelligent control system, built-in high-sensitivity vibration sensor and photosensitive system, can be turned on by itself in a dark environment while driving. And there is a delayed shutdown function, it will continue to work in the process of parking and waiting for the red light, and it will automatically shut down after 100 seconds of parking or no vibration of the body;
4. The product shell is made of fully conductive material, which can enhance the static electricity removal ability.
.............